Standards & References

Standards and references

Reference

The standards that shape a 77 GHz radar SoC, each linked to the page where it is used. Titles are abbreviated; always work from the current edition.

Qualification and quality

Standard	Scope	Used on
AEC-Q100	Stress-test qualification for integrated circuits (grades 0–3)	DFT: qualification
AEC-Q100-002 / -011	HBM and CDM ESD tests	ESD
AEC-Q100-004	IC latch-up test	ESD
AEC-Q100-005	Non-volatile memory endurance and retention	Reliability
AEC-Q100-008	Early life failure rate (ELFR)	Reliability
AEC-Q001 / Q002	Part average testing (PAT); statistical yield analysis (SYL/SBL)	Yield
AEC-Q104	Multichip modules (e.g. antenna-in-package modules)	Package
JEDEC JESD22-A104 / A108 / A110	Temperature cycling, HTOL, HAST test methods	Reliability
JEDEC JEP122	Failure mechanisms and models for semiconductor devices	Reliability
IATF 16949	Automotive quality management (APQP, PPAP, 8D)	Yield

Functional safety and security

Standard	Scope	Used on
ISO 26262 (2018), incl. part 11	Functional safety; part 11 is the guideline for semiconductors	Functional safety
ISO 21448 (SOTIF)	Safety of the intended functionality	Functional safety
ISO/SAE 21434	Road-vehicle cybersecurity engineering	Functional safety
IEC TR 62380 / SN 29500	Base failure rates for FMEDA	Functional safety

Test and DFT

Standard	Scope	Used on
IEEE 1149.1	JTAG boundary scan and test access port	DFT: JTAG
IEEE 1149.6	Boundary scan for AC-coupled and differential links	DFT: JTAG
IEEE 1687 (IJTAG)	Access network for on-chip instruments	Test muxes
IEEE 1500	Embedded core test wrapper	DFT: scan

ESD

Standard	Scope	Used on
ANSI/ESDA/JEDEC JS-001 / JS-002	HBM and CDM test methods	ESD
ISO 10605, IEC 61000-4-2	System-level ESD (module)	ESD

Radio

Standard	Scope	Used on
ETSI EN 301 091	76–77 GHz radar	Regulations
ETSI EN 302 264	77–81 GHz short-range radar	Regulations
FCC 47 CFR Part 95 subpart M	76–81 GHz vehicular radar in the USA	Regulations
EU RED 2014/53/EU	Radio Equipment Directive	Regulations
ITU-R M.2057	Characteristics of automotive radar in 76–81 GHz	Regulations

Interfaces

Standard	Scope	Used on
MIPI CSI-2 (D-PHY)	Camera-style serial interface for raw radar data	DSP
IEEE 802.3bw / 802.3bp	100BASE-T1 / 1000BASE-T1 automotive Ethernet	DSP
ISO 11898 (CAN, CAN-FD)	Vehicle bus	DSP

Glossary of abbreviations

Abbreviations are underlined with dots the first time they appear in each section. Hover to see the meaning; click to jump here. Use Search (Ctrl+K) to find an abbreviation anywhere on the page.

Radar system & ADAS

Abbr.	Stands for	Note
FCW	Forward Collision Warning	Warns of an imminent frontal collision; stage before AEB.
FCTA	Front Cross-Traffic Alert	Front corner-radar function at junctions and driveways.
RCTB	Rear Cross-Traffic Braking	Brakes automatically when RCTA detects cross traffic while reversing.
DOW	Door-Opening Warning	Warns before a door is opened into an approaching cyclist or car.
VRU	Vulnerable Road User	Pedestrians, cyclists and motorcyclists.
TTC	Time To Collision	Range divided by closing speed; triggers warnings and braking.
LRR	Long-Range Radar	Front radar, ≈ 200–300 m, narrow field of view.
MRR	Mid-Range Radar	≈ 80–160 m, ±40–60° field of view.
SRR	Short-Range Radar	Corner radar, ≈ 30–80 m, ±75–90° field of view.
NCAP	New Car Assessment Programme	Consumer safety ratings (Euro NCAP, C-NCAP, IIHS …).
GSR	General Safety Regulation (EU) 2019/2144	Makes AEB and other assistance functions mandatory in the EU.
CPD	Child Presence Detection	In-cabin sensing (often 60 GHz radar) that detects a child left in the car.
ACC	Adaptive Cruise Control	Keeps distance to the car ahead; uses long-range front radar.
ADAS	Advanced Driver-Assistance Systems	The vehicle functions the radar serves.
AEB	Autonomous Emergency Braking	Brakes automatically when a collision is imminent.
BSD	Blind-Spot Detection	Corner-radar function.
LCA	Lane-Change Assist	Corner-radar function that warns of fast approaching vehicles.
RCTA	Rear Cross-Traffic Alert	Rear corner-radar function when reversing.
L2	SAE automation Level 2 (L3 = Level 3)	Partial (L2) and conditional (L3) driving automation.
FMCW	Frequency-Modulated Continuous Wave	A linear chirp; range comes from the beat frequency f_b = S·2R/c.
FoV	Field of View	Angular coverage in azimuth and elevation.
RCS	Radar Cross Section	Target reflectivity in dBsm (car ≈ 10, pedestrian ≈ −10…0).
dBsm	Decibels relative to 1 m²	Unit of RCS.
EIRP	Effective Isotropic Radiated Power	Tx power + antenna gain; limited by regulations.
MIMO	Multiple-Input Multiple-Output	N_tx × N_rx channels form a larger virtual array.
TDM	Time-Division Multiplexing	One Tx per chirp; v_max falls by a factor of N_tx.
BPM	Binary Phase Modulation	0/180° codes across chirps separate the Tx signals.
DDMA	Doppler-Division Multiple Access	Each Tx gets a slow-time phase ramp and separates in Doppler.
DoA	Direction of Arrival	Angle estimation over the virtual array.
DBF	Digital Beamforming	FFT or matched steering over array channels.
CFAR	Constant False Alarm Rate	Adaptive detection threshold (CA = cell-averaging, OS = ordered-statistic).
FFT	Fast Fourier Transform	Range, Doppler and angle FFTs build the radar cube.
SNR	Signal-to-Noise Ratio
MUSIC	MUltiple SIgnal Classification	Subspace super-resolution DoA algorithm.
ESPRIT	Estimation of Signal Parameters via Rotational Invariance Techniques	Super-resolution DoA algorithm.
IAA	Iterative Adaptive Approach	Super-resolution spectral / DoA estimator.
DBSCAN	Density-Based Spatial Clustering of Applications with Noise	Groups detections into objects.
EKF	Extended Kalman Filter	Nonlinear tracking filter.
UKF	Unscented Kalman Filter	Nonlinear tracking filter using sigma points.
IMM	Interacting Multiple Model	Tracker that mixes several motion models.
HWA	Hardware Accelerator	On-chip FFT / radar processing engine.
RTS	Radar Target Simulator	Echo generator for HIL and EOL testing.
HIL	Hardware-in-the-Loop	Testing the real sensor against simulated scenarios.
EOL	End-of-Line	Final production test of a module or vehicle.

RF & analog front end

Abbr.	Stands for	Note
HPBW	Half-Power Beamwidth	Angle between the −3 dB points of an antenna or array beam.
PDN	Power Delivery Network	Regulators, planes, decoupling and package paths that supply the chip.
PI	Power Integrity	Keeping supply voltage within limits under load steps and noise.
EMI	Electromagnetic Interference	Unwanted emission or pick-up of electromagnetic energy.
BCI	Bulk Current Injection	Immunity test (ISO 11452-4) that injects RF current into a cable harness.
TIM	Thermal Interface Material	Gap pad or paste between board or package and the heat sink.
RF	Radio Frequency	Here the 76–81 GHz signal.
LO	Local Oscillator	The chirp signal that drives the Tx and the Rx mixers.
IF	Intermediate Frequency	The beat / baseband signal after the mixer, DC–20 MHz.
PA	Power Amplifier	Tx output stage, 12–14 dBm.
LNA	Low-Noise Amplifier	First Rx stage; sets most of the NF.
NF	Noise Figure	Noise the receiver adds, in dB.
VGA	Variable-Gain Amplifier	Programmable-gain stage (IF), or signed VGAs in the phase rotator.
TIA	Transimpedance Amplifier	Current-to-voltage stage after a passive mixer.
HPF	High-Pass Filter	In IF: removes leakage and DC, and equalises R⁻⁴.
LPF	Low-Pass Filter
AAF	Anti-Aliasing Filter	Low-pass filter in front of the ADC.
PPF	Polyphase Filter	RC-CR network that generates I/Q.
I/Q	In-phase / Quadrature	Two copies of a signal 90° apart.
IRR	Image Rejection Ratio	How well an I/Q path suppresses the mirror frequency.
SSB	Single Sideband	A frequency shift in one direction only, e.g. the loopback offset.
BPSK	Binary Phase-Shift Keying	0/180° switching; produces ±f_m sidebands.
VM	Vector Modulator	I/Q-weighted phase rotator.
RTPS	Reflection-Type Phase Shifter	Hybrid coupler terminated by tunable loads.
P1dB	1 dB compression point	Input (or output) level where gain drops by 1 dB.
IIP3	Input third-order intercept point	Linearity figure; cascades with the gain before each stage.
PAE	Power-Added Efficiency	(P_out − P_in) / P_DC of a PA.
Psat	Saturated output power	Maximum output power of a PA.
DSB	Double Sideband	Noise figure counting both sidebands (typical for zero-IF mixers).
PGA	Programmable-Gain Amplifier	IF VGA with digitally set gain steps.
AGC	Automatic Gain Control	Loop that sets the VGA gain from the signal level.
HD2	2nd-order Harmonic Distortion (HD3 = 3rd)	Harmonics show up as ghost targets at 2×/3× range.
AM/PM	Amplitude-to-phase conversion	Phase change caused by amplitude or supply changes.
RL	Return Loss	Match quality, in dB.
Cpl	Coupler (directional coupler)	Taps a small, known fraction (−15…−20 dB) of a signal for detection or loopback.
PD	Power Detector	Diode or square-law RF-to-DC converter.
APC	Automatic Power Control	Closed loop from the power detector to the VGA/PA gain code.
DPD	Digital Predistortion	Wideband PA linearisation used in comms; radar uses static gain/phase LUTs instead.
VSWR	Voltage Standing-Wave Ratio	Mismatch at the antenna/load; changes the delivered power.
CW	Continuous Wave	An unmodulated single-frequency tone.
ENR	Excess Noise Ratio	Calibrated output level of a noise source.
SiGe	Silicon-Germanium (BiCMOS)	Bipolar-plus-CMOS process used for earlier radar chips.
CMOS	Complementary Metal-Oxide-Semiconductor	RFCMOS = CMOS process with RF / mmWave capability.
RFCMOS	RF-capable CMOS	Today's single-chip radar process (e.g. 45/40/28/22 nm).
NMOS	N-channel MOS transistor (PMOS = P-channel)
PTAT	Proportional To Absolute Temperature	Voltage or current used by temperature sensors.
BG	Bandgap reference	Temperature-stable voltage reference (BG1/BG2 = two independent ones).
PVT	Process, Voltage, Temperature	Variation corners a design must cover.

LO, clock & synthesis

Abbr.	Stands for	Note
PLL	Phase-Locked Loop	Locks the VCO to the crystal and generates the ramp.
ADPLL	All-Digital PLL	PLL with a TDC and a digital loop filter.
VCO	Voltage-Controlled Oscillator	≈ 19–20.25 GHz, multiplied ×4 to 77 GHz.
PFD	Phase-Frequency Detector	Compares the divided VCO with the reference.
CP	Charge Pump; also Chip Probe	In a PLL: converts PFD pulses into loop-filter current. In test flows: wafer-level probe test.
TDC	Time-to-Digital Converter	Digital phase detector of an ADPLL.
XTAL	Crystal (reference oscillator)	40/50 MHz reference for PLL, ADC and digital.
DDS	Direct Digital Synthesizer	Digitally generated tone (IF test tone).
Kvco	VCO gain	Tuning sensitivity in MHz/V; varies per band.
AFC	Automatic Frequency Calibration (band calibration)	Picks the VCO capacitor-bank band before the PLL closes.
MMD	Multi-Modulus Divider	Programmable divider in the PLL feedback, dithered by the ΣΔ modulator.
CML	Current-Mode Logic	Fast differential logic used for the first divider (prescaler) stages at 20 GHz.

Data conversion & digital

Abbr.	Stands for	Note
SNM	Static Noise Margin	Noise an SRAM cell tolerates before flipping; read SNM is the critical one.
SEU	Single-Event Upset	Bit flip caused by a particle strike (soft error).
SER	Soft-Error Rate	Rate of radiation-induced bit flips, in FIT per Mbit.
MBU	Multi-Bit Upset	One particle flips several neighbouring cells.
RDF	Random Dopant Fluctuation	Random number of dopant atoms in a small channel; main cause of Vth mismatch.
LER	Line-Edge Roughness	Rough gate edges that add Vth variation in small devices.
NPSF	Neighbourhood Pattern-Sensitive Fault	Memory cell fails only for certain data in its neighbours.
SEC-DED	Single-Error Correction, Double-Error Detection	ECC code used on memory words (e.g. 64 + 8 bits).
ROM	Read-Only Memory	Mask-programmed memory for boot code and tables.
DRF	Data-Retention Fault	Memory cell loses its value after a pause.
WL	Word Line	Row select line of a memory array.
BL	Bit Line	Column data line of a memory array (BL and its complement BLB).
OSR	Oversampling Ratio	fs / (2·BW) of a ΣΔ ADC; each doubling adds (2L+1)·3 dB of SQNR.
NTF	Noise Transfer Function	How a ΣΔ loop shapes quantisation noise out of the signal band.
SNDR	Signal-to-Noise-and-Distortion Ratio	ENOB = (SNDR − 1.76) / 6.02.
GBW	Gain-Bandwidth product	Op-amp figure of merit; sets filter and PGA accuracy at IF.
CMRR	Common-Mode Rejection Ratio	How well a differential circuit rejects signals common to both inputs.
CSI-2	MIPI Camera Serial Interface 2	High-speed serial link used for raw radar data.
TSN	Time-Sensitive Networking	Deterministic automotive Ethernet (IEEE 802.1).
ADC	Analog-to-Digital Converter	Main Rx ADCs (ΣΔ) and the aux SAR ADC.
DAC	Digital-to-Analog Converter	Rotator I/Q weights, bias, trim, test-tone generation.
SAR	Successive-Approximation Register ADC	Slow, precise ADC used for monitoring.
CT	Continuous-Time (CT-ΣΔ)	Sigma-delta ADC with a continuous-time loop filter.
ENOB	Effective Number of Bits
SFDR	Spurious-Free Dynamic Range	Tone relative to the largest spur.
THD	Total Harmonic Distortion
DR	Dynamic Range
INL	Integral Nonlinearity	Deviation from the ideal transfer line.
DNL	Differential Nonlinearity	Deviation of each step from 1 LSB.
LSB	Least Significant Bit (MSB = most significant)
DFE	Digital Front End	Decimation, DC and I/Q correction, interference handling.
CIC	Cascaded Integrator-Comb	Multiplier-free decimation filter.
FIR	Finite Impulse Response filter
DSP	Digital Signal Processor
MCU	Microcontroller Unit
CPU	Central Processing Unit	E.g. the RF control CPU that runs chirps and monitors.
SoC	System-on-Chip
ECU	Electronic Control Unit	Vehicle computer that receives radar data.
SRAM	Static RAM (RAM = random-access memory)
ECC	Error-Correcting Code	Memory protection for functional safety.
DMA	Direct Memory Access
LUT	Look-Up Table	E.g. phase-code → (I, Q) DAC codes, Tx power vs. temperature.
FW	Firmware (SW = software)
OTP	One-Time Programmable memory	Holds trims and IDs, like eFuse.
SPI	Serial Peripheral Interface	Configuration / test bus from host or ATE.
CAN	Controller Area Network (CAN-FD = Flexible Data-rate)	Vehicle bus for object lists.
ETH	Ethernet (100/1000BASE-T1)	Automotive single-pair Ethernet.
CSI	Camera Serial Interface (MIPI CSI-2)	Streams raw radar data to a central SoC.
LVDS	Low-Voltage Differential Signaling	Raw-data debug / streaming interface.
GPIO	General-Purpose Input/Output
IO	Input/Output

Power

Abbr.	Stands for	Note
LDO	Low-Dropout regulator	Linear regulator; one per noise-sensitive domain.
PMIC	Power-Management IC	External bucks, supervisors and watchdog.
PSRR	Power-Supply Rejection Ratio	How much supply ripple an LDO (or circuit) blocks.
UV	Under-Voltage (OV = Over-Voltage)	Supply monitors, a safety mechanism.
OV	Over-Voltage	Rail above its window; OV monitor protects gate oxides.
POR	Power-On Reset	Holds the chip in reset until all rails are valid.
BOR	Brown-Out Reset	Resets when a supply sags during operation.
ESR	Equivalent Series Resistance	Of the LDO output capacitor; its zero affects loop stability.
OCP	Over-Current Protection	Current limit on a regulator output.
Iq	Quiescent current	Current a regulator draws for itself with no load.
DLDO	Digital LDO	Switched pass-device array regulated by a comparator loop.
GND	Ground

Test & production

Abbr.	Stands for	Note
EVB	Evaluation Board	Board that carries the chip on the bench with supplies, clock, interfaces and RF transitions.
SMU	Source-Measure Unit	Precision instrument that forces voltage or current and measures the other.
OTA	Over The Air	Measurement through antennas in a chamber instead of a cable or waveguide.
GSG	Ground-Signal-Ground probe	RF wafer probe with a signal tip between two ground tips.
LRRM	Line-Reflect-Reflect-Match calibration	On-wafer VNA calibration method for mmWave probes.
SCPI	Standard Commands for Programmable Instruments	Text command set used to automate instruments.
UPH	Units Per Hour	Test throughput of a tester and handler.
eFuse	Electrically programmable fuse	Silicided poly link blown by current; stores trim, ID and repair bits.
MTP	Multiple-Time Programmable memory	Small NVM that can be rewritten a few times.
NVM	Non-Volatile Memory	Keeps data without power: eFuse, OTP, MTP, flash.
VPP	Programming supply voltage	Supply used only to program fuses or OTP.
CRC	Cyclic Redundancy Check	Checksum that detects corrupted data, e.g. trim words at boot.
RMA	Return Material Authorization	A customer return, analysed through the 8D process.
8D	Eight Disciplines	Structured problem solving: team, describe, contain, root cause, correct, verify, prevent, close.
MSA	Measurement System Analysis	Proves a measurement is precise and accurate enough (Gage R&R, bias, stability).
GRR	Gage Repeatability and Reproducibility	%GRR < 10 % of tolerance is good.
BIST	Built-In Self-Test	On-chip stimulus + measurement; result is pass/fail or a value checked against a limit.
BISM	Built-In Self-Measurement	Same on-chip hardware, but the result is a calibrated value (dB, °, MHz) used for trim, calibration and trend.
DFT	Design for Test
ATE	Automatic Test Equipment	Production tester.
ATPG	Automatic Test Pattern Generation	Scan patterns for digital logic.
IDDQ	Quiescent supply-current test	Detects leakage defects.
PMU	Parametric Measurement Unit	ATE DC source/measure channel.
Cres	Contact resistance	Probe or socket contact resistance; measured with the Kelvin or two-current method.
FIMV	Force Current, Measure Voltage	PMU mode used for open/short (diode) tests.
FVMI	Force Voltage, Measure Current	PMU mode used for leakage and power-short tests.
IIL	Input leakage current, input Low (IIH = input High)	Leakage limit per IO pin, typically \|I\| < 1 µA.
IIH	Input leakage current, input High
ESD	Electrostatic Discharge	Pad protection diodes / clamps; the diode method uses them for continuity.
VDD	Positive supply rail (VSS = ground / negative rail)
VSS	Ground / negative supply rail
DCR	DC Resistance	E.g. of an RF shunt inductor, 0.5–3 Ω.
Hi-Z	High impedance (Z)	Output driver switched off; the pin floats.
OE	Output Enable	Control that switches an output between driving and Hi-Z.
IOZ	Off-state output leakage (IOZH at VDDIO, IOZL at 0 V)	Measured on a pin in Hi-Z; typically \|I\| < 1–10 µA.
VOH	Output High voltage threshold (VOL = Output Low)	Tester comparator levels that decide 1 / Z / 0.
VOL	Output Low voltage threshold
HIGHZ	IEEE 1149.1 instruction that puts all outputs in Hi-Z
EXTEST	IEEE 1149.1 external test instruction	Boundary cells drive and sample the pins; used for interconnect and walking-Z tests.
RPCT	Reduced Pin-Count Testing	Testing through JTAG / a few pins, so more sites fit on one tester.
BICS	Built-In Current Sensor	On-chip current monitor for IDDQ per power domain.
SPC	Statistical Process Control
VNA	Vector Network Analyzer	Lab instrument for S-parameters.
AWG	Arbitrary Waveform Generator
DMM	Digital Multimeter
GPIB	General-Purpose Interface Bus	Instrument control bus (like LAN).

Safety, standards & regulation

Abbr.	Stands for	Note
PMHF	Probabilistic Metric for random Hardware Failures	ISO 26262 residual failure rate; < 100 FIT for ASIL B/C, < 10 FIT for D.
SEooC	Safety Element out of Context	A part developed to ISO 26262 against assumed system requirements.
FMEA	Failure Mode and Effects Analysis	Qualitative analysis of failure modes; FMEDA adds rates and diagnostic coverage.
FIT	Failures In Time	Failures per 10⁹ device-hours.
MTTF	Mean Time To Failure
RED	Radio Equipment Directive (EU 2014/53/EU)	EU conformity framework for radio transmitters, including radar.
ASIL	Automotive Safety Integrity Level	ISO 26262 risk class A–D; radar typically ASIL-B.
ISO	ISO 26262 / ISO/SAE 21434 / ISO 11452	Functional safety / cybersecurity / EMC immunity.
FTTI	Fault-Tolerant Time Interval	Time from fault to hazard; monitors must react within it.
FMEDA	Failure Modes, Effects and Diagnostic Analysis
SPFM	Single-Point Fault Metric	ISO 26262 coverage metric.
LFM	Latent Fault Metric	ISO 26262 coverage metric.
AEC	Automotive Electronics Council (AEC-Q100 / Q200)	Qualification of ICs / passives.
ETSI	European Telecommunications Standards Institute	EN 301 091 / EN 303 396 radar standards.
FCC	Federal Communications Commission	US rules, Part 95M for 76–81 GHz.
EMC	Electromagnetic Compatibility
CISPR	Comité International Spécial des Perturbations Radioélectriques	CISPR 25: vehicle-component emissions.
OOB	Out-of-Band (emission)

Digital DFT, stress & reliability

Abbr.	Stands for	Note
UHST	Unbiased Highly Accelerated Stress Test	HAST without bias, 130 °C / 85 % RH; alternative to autoclave.
PTC	Power Temperature Cycling	Temperature cycling with the device powered on and off.
EDR	Endurance and Data Retention	Qualification of non-volatile memory (AEC-Q100-005).
DPA	Destructive Physical Analysis	Opening and sectioning parts to inspect their construction and damage.
SEM	Scanning Electron Microscope	High-magnification imaging of cross-sections and surfaces.
EDX	Energy-Dispersive X-ray spectroscopy	Element analysis in the SEM: corrosion, contamination, IMC phases.
FIB	Focused Ion Beam	Precise local cutting and imaging; also used for circuit edits.
LTPD	Lot Tolerance Percent Defective	Defect rate a sampling plan rejects with given confidence; 0 / 231 ≈ 1 % at 90 %.
PC	Preconditioning	Bake, moisture soak and reflow before environmental stress (JESD22-A113).
BLR	Board-Level Reliability	Reliability of the package soldered on a PCB (temperature cycling, drop, vibration).
SAC	Tin-Silver-Copper solder	Lead-free solder alloy (e.g. SAC305) used for balls.
PPAP	Production Part Approval Process	Automotive approval package, includes the qualification report.
DRC	Design Rule Check	Verifies layout against foundry manufacturing rules.
LVS	Layout Versus Schematic	Verifies that the layout matches the schematic netlist.
PEX	Parasitic Extraction	Extracts resistance, capacitance (and inductance) of the layout for post-layout simulation.
AMS	Analog / Mixed-Signal simulation	Simulation that combines transistor-level analog with digital models.
ECO	Engineering Change Order	Late design fix; a metal-only ECO changes only upper masks.
SCR	Silicon-Controlled Rectifier	Thyristor; used as a compact ESD clamp, and the parasitic structure behind latch-up.
GGNMOS	Grounded-Gate NMOS	ESD clamp that works by parasitic-bipolar snapback.
SE	Scan Enable	Selects shift (SE = 1) or functional capture (SE = 0) in scan flops.
SAF	Stuck-At Fault	Node permanently 0 or 1.
TDF	Transition Delay Fault	Node slow to rise or fall; needs at-speed test.
STA	Static Timing Analysis	Finds the longest paths for timing-aware ATPG.
OCV	On-Chip Variation	Timing derates in STA that account for local (mismatch) variation across the die.
OCC	On-Chip Clock Controller	Gates exact launch/capture pulses from the PLL for at-speed test.
LOC	Launch-On-Capture	At-speed scheme; also called broadside.
LOS	Launch-On-Shift	At-speed scheme; SE must switch at speed.
EDT	Embedded Deterministic Test	Scan compression (decompressor + compactor).
LFSR	Linear-Feedback Shift Register	Pseudo-random sequence generator.
PRPG	Pseudo-Random Pattern Generator	LFSR that feeds the scan chains in LBIST.
MISR	Multiple-Input Signature Register	Compresses responses into one signature.
STUMPS	Self-Test Using MISR and Parallel Shift-register sequence generator	Standard LBIST architecture.
LBIST	Logic BIST	On-chip random-pattern scan test; used at key-on.
MBIST	Memory BIST	On-chip March-algorithm test of SRAMs.
BIRA	Built-In Redundancy Analysis	Computes which spare rows/columns repair a memory.
BISR	Built-In Self-Repair	Loads the repair from eFuse at boot.
IR	IR drop	Supply voltage drop (current × resistance), high during scan shift.
JTAG	Joint Test Action Group (IEEE 1149.1)	Boundary scan and test access port.
TAP	Test Access Port	JTAG pins TCK, TMS, TDI, TDO, TRST.
BSDL	Boundary Scan Description Language	Describes a chip's JTAG boundary-scan cells.
IJTAG	Internal JTAG (IEEE 1687)	Network for accessing on-chip instruments.
MUX	Multiplexer	Selects one of N inputs; in test, routes sub-block nodes to shared instruments.
ATB	Analog Test Bus	Chip-wide wire pair (force + sense) that test muxes connect sub-block nodes to.
TG	Transmission Gate	Parallel NMOS + PMOS switch; passes the full voltage range.
SPDT	Single-Pole Double-Throw switch	One input to one of two outputs (SP4T = one of four).
BBM	Break-Before-Make	Switching order that opens the old path before closing the new one.
ICL	Instrument Connectivity Language (PDL = Procedural Description Language)	IJTAG description files.
ECID	Electronic Chip ID	Unique per-die ID for traceability.
HVST	High-Voltage Stress Test	Short over-voltage on the core rail to activate latent oxide defects.
VLV	Very-Low-Voltage test	Test below nominal V to expose resistive defects.
Vmin	Minimum operating voltage	The pass/fail edge in a shmoo; an outlier Vmin flags a defect.
PAT	Part Average Testing (AEC-Q001)	Outlier limits at robust μ ± 6σ.
DPAT	Dynamic Part Average Testing	PAT limits recalculated per lot or wafer.
GDBN	Good Die in Bad Neighbourhood	Wafer-map screen that rejects dies in defect clusters.
NNR	Nearest-Neighbour Residual	Compares a die's parameter with its wafer neighbours.
DPPM	Defective Parts Per Million	Shipped-quality metric; automotive target ≪ 1.
FT	Final Test	Package-level production test.
SLT	System-Level Test	Functional test by booting the application.
PCM	Process Control Monitor	Test structures in the scribe lines, measured by the fab (see WAT).
WAT	Wafer Acceptance Test	Fab's electrical test of PCM structures before shipping wafers.
OSAT	Outsourced Semiconductor Assembly and Test	Company that packages and tests the dies.
QA	Quality Assurance	Sample-based outgoing inspection and audits.
Cp	Process capability (Cp)	(USL − LSL) / 6σ: spec width vs process spread.
Cpk	Process capability index	min(USL − μ, μ − LSL) / 3σ; automotive often ≥ 1.33, critical ≥ 1.67.
USL	Upper Spec Limit (LSL = Lower Spec Limit)	Design limits; outside them the part is out of spec.
LSL	Lower Spec Limit
UCL	Upper Control Limit (LCL = Lower Control Limit)	Process limits from history, usually mean ± 3σ.
LCL	Lower Control Limit
OCAP	Out-of-Control Action Plan	Documented steps when an SPC rule fires.
MRB	Material Review Board	Decides what happens to held material: release, rework, scrap or deviation.
MIM	Metal-Insulator-Metal capacitor (MOM = Metal-Oxide-Metal)	Precision on-chip capacitors.
MOM	Metal-Oxide-Metal (finger) capacitor
BSIM	Berkeley Short-channel IGFET Model	Industry-standard compact transistor model family used in design kits.
Vt	Threshold voltage	Gate voltage where the channel turns on; Vt_lin at low Vds, Vt_sat at VDD.
Idsat	Saturation drain current	Id at Vgs = Vds = VDD, per µm of width; transistor strength.
Ioff	Off-state leakage current	Id at Vgs = 0, Vds = VDD.
DIBL	Drain-Induced Barrier Lowering	Vt drop per volt of Vds in short-channel devices.
SS	Subthreshold swing (also SS = slow-slow process corner)	mV of Vgs per decade of Id below Vt; ≈ 60 mV/dec ideal at room temperature.
TT	Typical-typical process corner	FF = fast-fast; FS / SF = skewed NMOS / PMOS corners.
FF	Fast-fast process corner
gm	Transconductance	∂Id/∂Vgs; the transistor's gain.
gds	Output conductance	∂Id/∂Vds; limits voltage gain (intrinsic gain = gm/gds).
Cox	Gate-oxide capacitance per area	εox / Tox.
Tox	Gate-oxide thickness	Measured with C-V structures in WAT.
fT	Transit (unity current-gain) frequency	≈ gm / 2π(Cgs + Cgd).
fmax	Maximum oscillation (unity power-gain) frequency	Needs ≈ 3–4× the operating frequency for useful gain.
Vbd	Gate-oxide breakdown voltage	Voltage where oxide current jumps past compliance in a V-ramp test.
BV	Breakdown Voltage	BVdss = drain-source (gate off), BVj = junction.
BVdss	Drain-source breakdown voltage	Transistor off-state breakdown; limits PA drain swing.
BVj	Junction breakdown voltage	Reverse breakdown of N+/P-well or P+/N-well diodes.
TLP	Transmission-Line Pulse	ESD device characterisation with short, high-current pulses.
QBD	Charge to breakdown	Total charge an oxide passes before breaking down (reliability).
IMD	Inter-Metal Dielectric	Insulator between metal lines/layers; tested with comb structures.
CMP	Chemical-Mechanical Planarization	Polishing step that flattens each layer; source of centre, edge and ring signatures.
OPC	Optical Proximity Correction	Mask shape corrections; weak spots (hotspots) can fail per reticle shot.
EBR	Edge Bead Removal	Removes resist build-up at the wafer edge.
D0	Defect density	Random defects per unit area; baseline yield Y ≈ e^(−D0·A).
HTOL	High-Temperature Operating Life	≈ 1000 h biased at max temperature (AEC-Q100).
ELFR	Early Life Failure Rate	Short high-temperature operation of a large sample.
TC	Temperature Cycling	Package and interconnect fatigue test.
THB	Temperature-Humidity-Bias	85 °C / 85% RH with bias.
HAST	Highly Accelerated Stress Test	130 °C / 85% RH with bias.
RH	Relative Humidity
HTSL	High-Temperature Storage Life	Unbiased bake.
HBM	Human-Body Model (ESD)
CDM	Charged-Device Model (ESD)
LU	Latch-Up	JESD78 test.
EM	Electromigration	Metal wear-out under current (wafer-level reliability).
TDDB	Time-Dependent Dielectric Breakdown	Gate-oxide wear-out.
HCI	Hot-Carrier Injection	Transistor degradation mechanism.
NBTI	Negative-Bias Temperature Instability	PMOS threshold drift.

PCB, package & materials

Abbr.	Stands for	Note
TCB	Thermo-Compression Bonding	Flip-chip attach with heat and force per die; fine pitch, low warpage.
MUF	Molded Underfill	Mold compound that also fills the gap under a flip-chip die.
CSAM	C-mode Scanning Acoustic Microscopy	Ultrasound imaging of voids and delamination inside packages.
AOI	Automated Optical Inspection	Camera inspection of RDL, bumps and balls in the assembly line.
KGD	Known-Good Die	Die that passed wafer sort and is released for assembly.
WLP	Wafer-Level Package	Package built on the whole wafer (fan-in) or a reconstituted wafer (fan-out).
PCB	Printed Circuit Board
RDL	Redistribution Layer	Thin-film Cu wiring that routes die pads to balls (fan-out) or bumps.
UBM	Under-Bump Metallisation	Metal stack between die/RDL pad and the solder.
FOWLP	Fan-Out Wafer-Level Package	Die embedded in mold with RDL fanning out to balls; eWLB is one type.
CSP	Chip-Scale Package	Package only slightly larger than the die (FC-CSP = flip-chip CSP).
AiP	Antenna-in-Package	Antennas built into package layers.
IMC	Intermetallic Compound	Layer formed between solder and UBM/pad; grows with time and temperature.
CTE	Coefficient of Thermal Expansion	Mismatch between materials drives solder and bump fatigue.
MSL	Moisture Sensitivity Level	J-STD-020 rating: how long a package may sit out of dry pack before reflow.
ELK	Extreme Low-k dielectric	Fragile back-end dielectric in advanced nodes; cracks under bump stress.
NSMD	Non-Solder-Mask-Defined pad	PCB pad style that improves solder-joint fatigue life.
Dk	Dielectric constant	Sets line impedance and antenna tuning; shifts with moisture.
Df	Dissipation factor	Dielectric loss; key for RF loss at 77 GHz.
C-SAM	C-mode Scanning Acoustic Microscopy	Non-destructive imaging of delamination and voids.
PBO	Polybenzoxazole	Polymer dielectric used in RDL (like polyimide).
EOS	Electrical Overstress	Damage from overvoltage or overcurrent beyond ESD events.
BGA	Ball Grid Array	FC-BGA = flip-chip BGA.
eWLB	embedded Wafer-Level Ball-grid-array	Fan-out package with low RF loss.
AoP	Antenna-on-Package
LoP	Launch-on-Package	RF launched from package into waveguide / antenna.
GCPW	Grounded Coplanar Waveguide	PCB transmission line at the ball launch.
SIW	Substrate-Integrated Waveguide	Waveguide formed with via fences in the PCB.
FR4	Flame-Retardant epoxy-glass laminate	Standard low-cost PCB material.
ENEPIG	Electroless Nickel, Electroless Palladium, Immersion Gold	PCB surface finish.
ImAg	Immersion Silver	PCB surface finish.
HASL	Hot-Air Solder Leveling	Surface finish; too rough/uneven for 77 GHz.
PBT	Polybutylene terephthalate (PC = polycarbonate)	Radome plastics.
HFSS	High-Frequency Structure Simulator (Ansys)	3D EM simulator (CST = Dassault's equivalent).